Electro-Mechanical Engineering Technology - Laser Major and Laser Certificate (EMETL, EMETLC)

This is an archived copy of the 2017-18 catalog. To access the most recent version of the catalog, please visit http://catalog.cincinnatistate.edu.

Electro-Mechanical Engineering Technology—Laser Major (EMETL)

Graduates with the Electro-Mechanical Engineering Technology - Laser Major are prepared to successfully begin careers and advance professionally in local and national industries that utilize lasers and electro-optics systems, or use industrial equipment in automated manufacturing and research environments.

Students work with laser material processing systems, and operate and troubleshoot optical systems including lasers, lens systems, and fiber optics.

Graduates earn an Associate of Applied Science degree and are also prepared to pursue a bachelor’s degree in fields such as electro-mechanical engineering or electrical engineering.

Electro-Mechanical Engineering Technology—Laser Certificate (EMETLC)

The Electro-Mechanical Engineering Technology – Laser Certificate prepares students to enter careers and advance professionally in local and national industries that utilize laser and electro-optics systems.

Students work with laser material processing systems, and operate and troubleshoot optical systems including laser, lens systems, and fiber optics.

Graduates of the certificate program receive OSHA 10 Electrical Safe Practices certification and are prepared for Laser Safety Officer training based on ANSI 36 standards, OSHA guidelines and the FDA Center for Devices and Radiological Health (CDRH).

For more information, please contact the Center for Innovative Technologies at (513) 569-1743.

To apply for this program at Cincinnati State, visit our Admissions Page

Electro-Mechanical Engineering Technology—Laser Major (EMETL)

Semester 1LecLabCredits
EMET 150Introduction to Controls and Robotics ( B) 122
CIT 105OSHA 10 General Industry Safety ( B) 101
EET 131Circuit Analysis 1 ( T) 324
PSET 110Power Systems Computer Aided Drafting ( B) 233
FYE 1XX First Year Experience Elective (B)  101
MAT XXX Mathematics Elective 1 (G)  324
Semester 2  
EMET 180Process Instrumentation ( T) 233
EET 132Circuit Analysis 2 ( T) 324
ENG 101English Composition 1 303
MAT XXX Mathematics Elective 2 (B)  324
Semester 3  
XXX XXX Cooperative Education or Transfer Elective 1 (T)  1402
Semester 4  
EMET 240Programmable Logic Controllers, Motors, Motor Controls, and Kinematics ( T) 233
EMET 245Laser 1 ( T) 233
PHY XXX Physics Elective (G)  324
ENG 10X English Composition Elective (G)  303
Semester 5  
EMET 246Laser 2 ( T) 334
EMET 270Robotics and Servomechanisms ( T) 334
EMET 275Electric Drive Mechanisms ( T) 334
MET 150Statics and Strength of Materials for MET ( B) 233
XXX XXX Arts/Humanities or Social/Behavioral Science Elective (G)  303
Semester 6  
XXX XXX Cooperative Education or Transfer Elective 2 (T)  1402
Total Credits:  4811664

Electives 

First Year Experience Elective
FYE 100College Survival Skills1
FYE 105College Success Strategies2
FYE 110Community College Experience3
Mathematics Electives8
Select one of the following series:
Algebra and Trigonometry
and Functions and Calculus
Or
Calculus 1
and Calculus 2
English Composition Elective
ENG 102English Composition 2: Contemporary Issues3
ENG 104English Composition 2: Technical Communication3
Physics Elective
PHY 151Physics 1: Algebra and Trigonometry-Based4
PHY 201Physics 1: Calculus-Based5
Arts/Humanities or Social/Behavioral Science Elective
Any ECO, GEO, HST, LBR, LIT, PHI
Cooperative Education or Transfer Electives *
EMET 291Full-Time Cooperative Education 1: Electro-Mechanical Engineering Technology2
EMET 292Full-Time Cooperative Education 2: Electro-Mechanical Engineering Technology2
EET 121Digital Systems 13
ESET 251Electronics4
MET 140Engineering Materials3
*

Program Chair approval is required for students planning to take a Transfer Elective course rather than participate in cooperative education.  

The letters G, B, and T (displayed after course titles or elective descriptions) identify types of courses required by the Ohio Department of Higher Education as part of an associate’s degree curriculum. 

G = General Education course in this curriculum

B = Basic Skills course in this curriculum

T = Technical course in this curriculum

Electro-Mechanical Engineering Technology - Laser Certificate (EMETLC)

Semester 1LecLabCredits
EMET 245Laser 1 233
CIT 105OSHA 10 General Industry Safety 101
Semester 2  
EMET 246Laser 2 334
Total Credits:  668

Courses

EMET 150 Introduction to Controls and Robotics
2 Credits. 1 Lecture Hour. 2 Lab Hours.

A course on operation and use of robots in manufacturing applications. Topics include: programmable robotics, flow charting, logic controllers, motors, control language, motion, and quality assurance.
Prerequisites: AFL 085, and AFM 094 or MAT 120, or appropriate placement test scores

EMET 180 Process Instrumentation
3 Credits. 2 Lecture Hours. 3 Lab Hours.

A course on process instrumentation theory and applications. Topics include: principles and practices of measurement and control of temperature, pressure, flow, level, and analytical quantities; and data acquisition for process instruments and controls.
Prerequisites: EMET 140, EET 131

EMET 191 Part-Time Cooperative Education 1: Electro-Mechanical Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their first part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None

EMET 192 Part-Time Cooperative Education 2: Electro-Mechanical Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their second part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 191

EMET 193 Part-Time Cooperative Education 3: Electro-Mechanical Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their third part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 192

EMET 194 Part-Time Cooperative Education 4: Electro-Mechanical Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fourth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 193

EMET 195 Part-Time Cooperative Education 5: Electro-Mechanical Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fifth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 194

EMET 196 Part-Time Cooperative Education 6: Electro-Mechanical Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their sixth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 195

EMET 198 First Year Special Topics in Electro-Mechanical Engineering Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A course on selected topics related to Electro-Mechanical Engineering Technology, which gives students opportunities to study information not currently covered in other courses. Grades issued are A, B, C, D, or F.
Prerequisites: Instructor Approval

EMET 199 First Year Independent Project in Electro-Mechanical Engineering Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A project related to Electro-Mechanical Engineering Technology that is completed by one or more students to meet specific educational goals. Projects must have prior approval and supervision by Electro-Mechanical Engineering Technology faculty. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: Instructor Approval

EMET 210 Energy Efficiency and Audits
3 Credits. 2 Lecture Hours. 2 Lab Hours.

A course on concepts related to energy consumption. Topics include: conducting energy audits for residential, commercial, and industrial locations; conserving energy; reducing energy consumption; and applying renewable energies.
Prerequisites: None

EMET 225 Solar and Renewable Energy
3 Credits. 2 Lecture Hours. 3 Lab Hours.

A course on planning, installing, and maintaining solar and renewable energy devices. Topics include: photovoltaic electrical systems, solar thermal systems, fuel cell technology, and wind turbine technology.
Prerequisites: EMET 210

EMET 230 Fuel Cells and Wind Devices
3 Credits. 2 Lecture Hours. 2 Lab Hours.

A course on planning, installing, and maintaining alternative energy sources. Topics include: converting chemical energy to electricity; fuel cell components, power efficiencies, and applications; electrolysis; and wind turbine components.
Prerequisites: EMET 210

EMET 240 Programmable Logic Controllers, Motors, Motor Controls, and Kinematics
3 Credits. 2 Lecture Hours. 3 Lab Hours.

A course on programmable logic controllers, motors, and variable speed drives and mechanisms. Topics include: operating, troubleshooting, and controlling circuits; calculating speed, torque, horsepower, and efficiency; and machine kinematics.
Prerequisites: EET 132

EMET 245 Laser 1
3 Credits. 2 Lecture Hours. 3 Lab Hours.

A course on the operational theory and safe use of lasers. Topics include: properties of laser light, elements of the laser, laser classifications, structure of the eye, and hazards associated with laser light.
Prerequisites: EMET 150, and MAT 121 or appropriate placement test score

EMET 246 Laser 2
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A continuation of EMET 245, covering optical elements and types of industrial lasers used in photonics applications. Topics include: lenses, mirrors, prisms, laser modulators and Q-switches, optical power, energy measurements, and applying lasers for advanced manufacturing.
Prerequisites: EMET 245

EMET 270 Robotics and Servomechanisms
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A course on theory and applications of robotics and servomechanisms. Topics include: analyzing industrial robotics applications in automated manufacturing environments; programming and operating robots; transducers, proportional, proportional-integral, and proportional-integral-derivative positional control systems; and closed- loop controls.
Prerequisites: EET 132

EMET 275 Electric Drive Mechanisms
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A course on electric drive systems used in electric vehicles and stationary power systems. Topics include: power and energy measurement, energy storage, battery monitoring, motor drives, control electronics and instrumentation, power transmission, and electrical safety devices.
Prerequisites: EMET 240

EMET 291 Full-Time Cooperative Education 1: Electro-Mechanical Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None

EMET 292 Full-Time Cooperative Education 2: Electro-Mechanical Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 291

EMET 293 Full-Time Cooperative Education 3: Electro-Mechanical Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their third full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 292

EMET 294 Internship 1: Electro-Mechanical Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 140

EMET 295 Internship 2: Electro-Mechanical Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EMET 294

EMET 298 Second Year Special Topics in Electro-Mechanical Engineering Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A course on selected topics related to Electro-Mechanical Engineering Technology, which gives students opportunities to study information not currently covered in other courses. Grades issued are A, B, C, D, or F.
Prerequisites: Instructor Approval

EMET 299 Second Year Independent Project in Electro-Mechanical Engineering Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A project related to Electro-Mechanical Engineering Technology that is completed by one or more students to meet specific educational goals. Projects must have prior approval and supervision by Electro-Mechanical Engineering Technology faculty. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: Instructor Approval

Faculty

Program Chair/Advisor

Professor Lawrence (Larry) Feist, BS
lawrence.feist@cincinnatistate.edu

Co-op Coordinator

Professor Sue Dolan, M.Ed.
sue.dolan@cincinnatistate.edu