Aviation Maintenance Technology (AMT, AVAC, & AVPC)

This is an archived copy of the 2018-2019 catalog. To access the most recent version of the catalog, please visit http://catalog.cincinnatistate.edu.

Aviation Maintenance Technology (AMT)

The Aviation Maintenance Technology program provides students with the skills needed to keep aircraft operating safely and efficiently by servicing, repairing, and overhauling aircraft components and systems. Coursework covers every system of today's aircraft.

Graduates of the program earn an Associate of Applied Science degree and are prepared to take the FAA licensing tests for Airframe mechanic and Powerplant mechanic.

For more information, please contact the Center for Innovative Technologies at (513) 569-1743.

To apply for this program at Cincinnati State, visit the Admissions section of the College website.

Aviation Mechanics Airframe Certificate (AVAC)

The Aviation Mechanics Airframe Certificate includes the study of aircraft structures and hydraulic, electrical, and landing gear systems. Lab experiences include aircraft inspection, troubleshooting, and repair.

Following successful completion of the Airframe Certificate requirements, students may take Federal Aviation Administration (FAA) licensing tests. Certification requirements are subject to current FAA requirements and may change without notice.

For more information, please contact the Center for Innovative Technologies at (513) 569-1743.

To apply for this program at Cincinnati State, visit the Admissions section of the College website.

Aviation Mechanics Powerplant Certificate (AVPC)

The Aviation Mechanics Powerplant Certificate includes the study of all types of aircraft engines (small and large piston, and jet), along with the study of engine systems and propellers. Lab experiences include inspection, troubleshooting, and repair of aircraft engines.

Following successful completion of the certificate, students may take Federal Aviation Administration (FAA) licensing tests. Certification requirements are subject to current FAA regulations and may change without notice.

For more information, please contact the Center for Innovative Technologies at (513) 569-1743.

To apply for this program at Cincinnati State, visit the Admissions section of the College website.

Aviation Maintenance Technology (AMT)

Semester 1LecLabCredits
AMT 100Aviation Standard Practices ( B) 466
AMT 105Aircraft Orientation ( B) 254
MAT 121Technical Algebra and Geometry with Statistics ( G) 223
AMT 110Aircraft Electricity ( B) 334
FYE 1XX First Year Experience Elective (B)  101
AMT 115Aircraft Weight and Balance ( B) 334
Semester 2  
AMT 135Aircraft Landing Gear Systems ( T) 355
AMT 140Airframe Electrical Systems ( T) 446
PHY 115Aviation Maintenance Physics ( G) 334
AMT 120Aircraft Non-Metal Structures ( T) 345
AMT 130Aircraft Welding Processes ( T) 223
Semester 3  
AMT 125Aircraft Metal Structures ( T) 355
AMT 145Airframe Electronic Systems ( T) 212
AMT 150Airframe Systems ( T) 334
AMT 155Airframe Assembly and Rigging ( T) 345
AMT 160Airframe Inspection ( T) 132
ENG 101English Composition 1 ( G) 303
Semester 4  
AMT 191Part-Time Cooperative Education 1: Aviation Maintenance Technology ( T) 1201
ENG 104English Composition 2: Technical Communication ( G) 303
AMT 201Powerplant Maintenance 1 ( T) 466
AMT 215Aircraft Propellers ( T) 334
Semester 5  
AMT 192Part-Time Cooperative Education 2: Aviation Maintenance Technology ( T) 1201
AMT 202Powerplant Maintenance 2 ( T) 466
AMT 205Starting and Ignition Systems ( T) 345
Semester 6  
AMT 193Part-Time Cooperative Education 3: Aviation Maintenance Technology ( T) 1201
AMT 203Powerplant Maintenance 3 ( T) 466
AMT 210Engine Fuel and Lubrication Systems ( T) 466
PHI 110Ethics ( G) 303
Total Credits:  76144108

Electives

First Year Experience Elective
FYE 100College Survival Skills1
FYE 105College Success Strategies2
FYE 110Community College Experience3

The letters G, B, and T (displayed after course titles or elective descriptions) identify types of courses required by the Ohio Department of Higher Education as part of an associate’s degree curriculum. 

G = General Education course in this curriculum

B = Basic Skills course in this curriculum

T = Technical course in this curriculum

Aviation Mechanics Airframe Certificate (AVAC)

Semester 1LecLabCredits
AMT 100Aviation Standard Practices 466
AMT 105Aircraft Orientation 254
AMT 110Aircraft Electricity 334
AMT 115Aircraft Weight and Balance 334
MAT 121Technical Algebra and Geometry with Statistics 223
Semester 2  
AMT 120Aircraft Non-Metal Structures 345
AMT 130Aircraft Welding Processes 223
AMT 135Aircraft Landing Gear Systems 355
AMT 140Airframe Electrical Systems 446
PHY 115Aviation Maintenance Physics 334
Semester 3  
AMT 125Aircraft Metal Structures 355
AMT 145Airframe Electronic Systems 212
AMT 150Airframe Systems 334
AMT 155Airframe Assembly and Rigging 345
AMT 160Airframe Inspection 132
ENG 101English Composition 1 303
Total Credits:  445365

Aviation Mechanics Powerplant Certificate (AVPC)

Semester 1LecLabCredits
AMT 100Aviation Standard Practices 466
AMT 105Aircraft Orientation 254
AMT 110Aircraft Electricity 334
AMT 115Aircraft Weight and Balance 334
MAT 121Technical Algebra and Geometry with Statistics 223
Semester 2  
AMT 201Powerplant Maintenance 1 466
AMT 215Aircraft Propellers 334
PHY 115Aviation Maintenance Physics 334
Semester 3  
AMT 202Powerplant Maintenance 2 466
AMT 205Starting and Ignition Systems 345
ENG 101English Composition 1 303
Semester 4  
AMT 203Powerplant Maintenance 3 466
AMT 210Engine Fuel and Lubrication Systems 466
Total Credits:  425361

Aviation Maintenance Technology (AMT)

  • Identify, inspect, repair, and fabricate fluid lines and fittings including rigid and flexible fluid and pneumatic system components.
  • Identify, inspect, install, torque, and safety-check aircraft hardware.
  • Identify various types of corrosion on aircraft structure, and use proper cleaning and treatment techniques.
  • Read, interpret, and analyze aircraft technical data, engineering drawings, and sketch and record repair schemes for aircraft.
  • Perform ground operations and servicing of aircraft including taxiing, towing, marshaling, tie-down, engine run, and fuel and oil servicing.
  • Understand mechanic privileges and limitations in accordance with Federal Aviation Regulations.
  • Review aerodynamics and the application theory and concepts associated with the physics of aircraft flight.
  • Understand and demonstrate concepts of electricity including troubleshooting faults and electrical installations.
  • Understand and complete FAA required maintenance forms and records for aircraft maintenance.
  • Understand concepts and techniques related to aircraft weight and balance, and perform weight and balance calculations and documentation.
  • Utilize technical applications of algebra, geometry, and statistical analysis as necessary for employer requirements.
  • Inspect, maintain, and repair metallic and non-metallic aircraft primary, secondary, and tertiary structural assemblies.
  • Inspect, maintain, and repair landing gear, hydraulic and pneumatic systems, fuel systems, HVAC systems, electrical systems, fire and smoke protection systems, auxiliary power units, and oxygen systems.
  • Inspect, maintain, and repair aircraft reciprocating engines, propellers, and aircraft turbine engines.

Courses

AMT 100 Aviation Standard Practices
6 Credits. 4 Lecture Hours. 6 Lab Hours.

A course that uses FAA-approved instruction for foundation concepts and techniques in aviation maintenance. Topics include: fluid lines and fittings, materials and processes, and cleaning and corrosion control.
Prerequisites: AFL 085 or appropriate placement test score

AMT 105 Aircraft Orientation
4 Credits. 2 Lecture Hours. 5 Lab Hours.

A course on foundation concepts in aviation maintenance. Topics include: aircraft drawings, ground operations and servicing, mechanic privileges, and basic concepts of physics.
Prerequisites: AFL 085 or appropriate placement test score

AMT 110 Aircraft Electricity
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A course that uses FAA-approved instruction for foundation concepts and techniques in aviation maintenance. Topics include: basic concepts of math, physics, and electricity; aircraft drawings; and maintenance forms and records.
Prerequisites: MAT 120 or appropriate placement test score

AMT 115 Aircraft Weight and Balance
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A course on foundation concepts and techniques related to aircraft weight and balance. Topics include: maintenance forms and records, and maintenance publications.
Prerequisites: MAT 120 or appropriate placement test score

AMT 120 Aircraft Non-Metal Structures
5 Credits. 3 Lecture Hours. 4 Lab Hours.

A course on wood structures, aircraft covering, aircraft finishes, and inspection of bonded structures.
Prerequisites: AMT 105

AMT 125 Aircraft Metal Structures
5 Credits. 3 Lecture Hours. 5 Lab Hours.

A course on repairing and maintaining sheet metal structures. Topics include: selecting and installing rivets and fasteners, forming and bending sheet metal, and laying out repairs.
Prerequisites: AMT 100 and AMT 105

AMT 130 Aircraft Welding Processes
3 Credits. 2 Lecture Hours. 2 Lab Hours.

A course on welding of magnesium, titanium, aluminum, and steel in aircraft. The course does not prepare students for certification specific to welding.
Prerequisites: None

AMT 135 Aircraft Landing Gear Systems
5 Credits. 3 Lecture Hours. 5 Lab Hours.

A course on repairing and maintaining aircraft landing gear systems and hydraulic and pneumatic power systems.
Prerequisites: AMT 105 and MAT 121

AMT 140 Airframe Electrical Systems
6 Credits. 4 Lecture Hours. 4 Lab Hours.

A course on troubleshooting aircraft electrical systems and inspecting direct current generators.
Prerequisites: AMT 105 and AMT 110

AMT 145 Airframe Electronic Systems
2 Credits. 2 Lecture Hours. 1 Lab Hour.

A course on aircraft instrument systems and communication and navigation systems.
Prerequisites: AMT 105 and AMT 110

AMT 150 Airframe Systems
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A course on systems for cabin atmosphere and control, position and warning, ice and rain control, fire protection, and aircraft fuel.
Prerequisites: AMT 100, AMT 105, and AMT 110

AMT 155 Airframe Assembly and Rigging
5 Credits. 3 Lecture Hours. 4 Lab Hours.

A course on balancing rigging, and inspecting primary and secondary flight controls of rotor and fixed wing aircraft.
Prerequisites: AMT 100, AMT 105, and MAT 121

AMT 160 Airframe Inspection
2 Credits. 1 Lecture Hour. 3 Lab Hours.

A course on inspection of airframes and sheet metal structures, repair of sheet metal structures, and conformity inspections on rotor and fixed wing aircraft.
Prerequisites: AMT 105 and AMT 115

AMT 191 Part-Time Cooperative Education 1: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their first part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 100

AMT 192 Part-Time Cooperative Education 2: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their first part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 191

AMT 193 Part-Time Cooperative Education 3: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their third part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 192

AMT 194 Part-Time Cooperative Education 4: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fourth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 193

AMT 195 Part-Time Cooperative Education 5: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fifth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 194

AMT 196 Part-Time Cooperative Education 6: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their sixth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 195

AMT 198 First Year Special Topics in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A course on selected topics related to Aviation Maintenance Technology, which gives students opportunities to study information not currently covered in other courses. Grades issued are A, B, C, D, or F.
Prerequisites: Instructor Approval

AMT 199 First Year Independent Project in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A project related to Aviation Maintenance Technology that is completed by one or more students to meet specific educational goals. Projects must have prior approval and supervision by Aviation Maintenance Technology faculty. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: Instructor Approval

AMT 201 Powerplant Maintenance 1
6 Credits. 4 Lecture Hours. 6 Lab Hours.

A course that uses FAA-approved instruction for concepts and techniques in inspection and repair of radial engines; overhaul of reciprocation engines; and inspection, check, service and repair of reciprocating engines and engine systems.
Prerequisites: AMT 100 and AMT 105

AMT 202 Powerplant Maintenance 2
6 Credits. 4 Lecture Hours. 6 Lab Hours.

A continuation of AMT 201, using FAA-approved instruction for concepts and techniques in installation, troubleshooting, and removal of reciprocating engines; overhaul of turbine engines; and induction and engine airflow systems.
Prerequisites: AMT 201

AMT 203 Powerplant Maintenance 3
6 Credits. 4 Lecture Hours. 6 Lab Hours.

A continuation of AMT 202, using FAA-approved instruction in the subject areas of inspection, check, service, and repair of turbine engines and turbine engine installations; installation, troubleshooting, and removal of turbine engines; performing powerplant conformity and airworthiness inspection; engine exhaust and reverser systems; unducted fans; and auxiliary power units.
Prerequisites: AMT 202

AMT 205 Starting and Ignition Systems
5 Credits. 3 Lecture Hours. 4 Lab Hours.

A course that uses FAA-approved instruction for concepts and techniques in ignition and starting systems for reciprocating and turbine aircraft engines. Topics include: inspection, troubleshooting, and repair.
Prerequisites: AMT 105 and AMT 110

AMT 210 Engine Fuel and Lubrication Systems
6 Credits. 4 Lecture Hours. 6 Lab Hours.

A course that uses FAA-approved instruction for concepts and techniques in lubrication systems, fuel metering systems, and engine fuel systems.
Prerequisites: AMT 100 and AMT 105

AMT 215 Aircraft Propellers
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A course that uses FAA-approved instruction for concepts and techniques in removal, installation, inspection, and repair of fixed and variable pitch aircraft propellers and propeller governing systems.
Prerequisites: AMT 105 and AMT 115

AMT 271 Avionics 1
4 Credits. 3 Lecture Hours. 2 Lab Hours.

A course on concepts and skills for repair of avionics equipment. Topics include: procedures used by air carriers and repair stations; avionics publications, forms,and records; tools and equipment; buildup of wire bundles; review of Boolean Algebra; and ARINC codes.
Prerequisites: AMT 155

AMT 272 Avionics 2
4 Credits. 3 Lecture Hours. 2 Lab Hours.

A continuation of AMT 271. Topics include: logic gates, troubleshooting analog and digital electronic systems to line replicable units, amplifier theory, on-board navigation and maintenance computer systems, and intercom and passenger entertainment systems.
Prerequisites: AMT 271

AMT 291 Full-Time Cooperative Education 1: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None

AMT 292 Full-Time Cooperative Education 2: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 291

AMT 293 Full-Time Cooperative Education 3: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their third full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 292

AMT 294 Internship 1: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 100

AMT 295 Internship 2: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 294

AMT 298 Second Year Special Topics in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A course on selected topics related to Aviation Maintenance Technology, which gives students opportunities to study information not currently covered in other courses. Grades issued are A, B, C, D, or F.
Prerequisites: Instructor Approval

AMT 299 Second Year Independent Project in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.

A project related to Aviation Maintenance Technology that is completed by one or more students to meet specific educational goals. Projects must have prior approval and supervision by Aviation Maintenance Technology faculty. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: Instructor Approval

Faculty

Program Chair/Advisor

Jeff Wright, MS, FAA A&P, DME
jeffrey.wright@cincinnatistate.edu

Co-op Coordinator

Professor Kimberly Richards, PhD
kimberly.richards@cincinatistate.edu