Aviation Maintenance Technology (AMT, AVAC, & AVPC)
Aviation Maintenance Technology (AMT)
The Aviation Maintenance Technology program provides students with the skills needed to keep aircraft operating safely and efficiently by servicing, repairing, and overhauling aircraft components and systems. Coursework covers every system of today's aircraft.
Graduates of the program earn an Associate of Applied Science degree and are prepared to take the FAA licensing tests for Airframe Mechanic and Powerplant Mechanic.
For more information, please contact the Center for Innovative Technologies at (513) 569-1743.
To apply for this program at Cincinnati State, visit the Admissions section of the College website.
Aviation Mechanics Airframe Certificate (AVAC)
The Aviation Mechanics Airframe Certificate includes the study of aircraft structures and hydraulic, electrical, and landing gear systems. Lab experiences include aircraft inspection, troubleshooting, and repair.
Following successful completion of the Airframe Certificate requirements, students may take Federal Aviation Administration (FAA) licensing tests. Certification requirements are subject to current FAA requirements and may change without notice.
For more information, please contact the Center for Innovative Technologies at (513) 569-1743.
To apply for this program at Cincinnati State, visit the Admissions section of the College website.
Aviation Mechanics Powerplant Certificate (AVPC)
The Aviation Mechanics Powerplant Certificate includes the study of all types of aircraft engines (small and large piston, and jet), along with the study of engine systems and propellers. Lab experiences include inspection, troubleshooting, and repair of aircraft engines.
Following successful completion of the certificate, students may take Federal Aviation Administration (FAA) licensing tests. Certification requirements are subject to current FAA regulations and may change without notice.
For more information, please contact the Center for Innovative Technologies at (513) 569-1743.
To apply for this program at Cincinnati State, visit the Admissions section of the College website.
Aviation Maintenance Technology (AMT)
| Semester 1 | Lec | Lab | Credits | |
|---|---|---|---|---|
| AMT 100 | Aviation Standard Practices ( B) | 4 | 6 | 6 |
| AMT 105 | Aircraft Orientation ( B) | 2 | 5 | 4 |
| MAT 121 | Technical Algebra and Geometry with Statistics ( G) | 2 | 2 | 3 |
| AMT 110 | Aircraft Electricity ( B) | 3 | 3 | 4 |
| FYE 1XX First Year Experience Elective (B) | 1 | 0 | 1 | |
| AMT 115 | Aircraft Weight and Balance ( B) | 3 | 3 | 4 |
| Semester 2 | ||||
| AMT 135 | Aircraft Landing Gear Systems ( T) | 3 | 5 | 5 |
| AMT 140 | Airframe Electrical Systems ( T) | 4 | 4 | 6 |
| PHY 115 | Aviation Maintenance Physics ( G) | 3 | 3 | 4 |
| AMT 120 | Aircraft Non-Metal Structures ( T) | 3 | 4 | 5 |
| AMT 130 | Aircraft Welding Processes ( T) | 2 | 2 | 3 |
| Semester 3 | ||||
| AMT 125 | Aircraft Metal Structures ( T) | 3 | 5 | 5 |
| AMT 145 | Airframe Electronic Systems ( T) | 2 | 1 | 2 |
| AMT 150 | Airframe Systems ( T) | 3 | 3 | 4 |
| AMT 155 | Airframe Assembly and Rigging ( T) | 3 | 4 | 5 |
| AMT 160 | Airframe Inspection ( T) | 1 | 3 | 2 |
| ENG 101 | English Composition 1 ( G) | 3 | 0 | 3 |
| Semester 4 | ||||
| AMT 191 | Part-Time Cooperative Education 1: Aviation Maintenance Technology ( T) | 1 | 20 | 1 |
| ENG 104 | English Composition 2: Technical Communication ( G) | 3 | 0 | 3 |
| AMT 201 | Powerplant Maintenance 1 ( T) | 4 | 6 | 6 |
| AMT 215 | Aircraft Propellers ( T) | 3 | 3 | 4 |
| Semester 5 | ||||
| AMT 192 | Part-Time Cooperative Education 2: Aviation Maintenance Technology ( T) | 1 | 20 | 1 |
| AMT 202 | Powerplant Maintenance 2 ( T) | 4 | 6 | 6 |
| AMT 205 | Starting and Ignition Systems ( T) | 3 | 4 | 5 |
| Semester 6 | ||||
| AMT 193 | Part-Time Cooperative Education 3: Aviation Maintenance Technology ( T) | 1 | 20 | 1 |
| AMT 203 | Powerplant Maintenance 3 ( T) | 4 | 6 | 6 |
| AMT 210 | Engine Fuel and Lubrication Systems ( T) | 4 | 6 | 6 |
| PHI 110 | Ethics ( G) | 3 | 0 | 3 |
| Total Credits: | 76 | 144 | 108 | |
Electives
| First Year Experience Elective | ||
| FYE 100 | College Survival Skills | 1 |
| FYE 105 | College Success Strategies | 2 |
| FYE 110 | Community College Experience | 3 |
The letters G, B, and T (displayed after course titles or elective descriptions) identify types of courses required by the Ohio Department of Higher Education as part of an associate’s degree curriculum.
G = General Education course in this curriculum
B = Basic Skills course in this curriculum
T = Technical course in this curriculum
Aviation Mechanics Airframe Certificate (AVAC)
| Semester 1 | Lec | Lab | Credits | |
|---|---|---|---|---|
| AMT 100 | Aviation Standard Practices | 4 | 6 | 6 |
| AMT 105 | Aircraft Orientation | 2 | 5 | 4 |
| AMT 110 | Aircraft Electricity | 3 | 3 | 4 |
| AMT 115 | Aircraft Weight and Balance | 3 | 3 | 4 |
| MAT 121 | Technical Algebra and Geometry with Statistics | 2 | 2 | 3 |
| Semester 2 | ||||
| AMT 120 | Aircraft Non-Metal Structures | 3 | 4 | 5 |
| AMT 130 | Aircraft Welding Processes | 2 | 2 | 3 |
| AMT 135 | Aircraft Landing Gear Systems | 3 | 5 | 5 |
| AMT 140 | Airframe Electrical Systems | 4 | 4 | 6 |
| PHY 115 | Aviation Maintenance Physics | 3 | 3 | 4 |
| Semester 3 | ||||
| AMT 125 | Aircraft Metal Structures | 3 | 5 | 5 |
| AMT 145 | Airframe Electronic Systems | 2 | 1 | 2 |
| AMT 150 | Airframe Systems | 3 | 3 | 4 |
| AMT 155 | Airframe Assembly and Rigging | 3 | 4 | 5 |
| AMT 160 | Airframe Inspection | 1 | 3 | 2 |
| ENG 101 | English Composition 1 | 3 | 0 | 3 |
| Total Credits: | 44 | 53 | 65 | |
Aviation Mechanics Powerplant Certificate (AVPC)
| Semester 1 | Lec | Lab | Credits | |
|---|---|---|---|---|
| AMT 100 | Aviation Standard Practices | 4 | 6 | 6 |
| AMT 105 | Aircraft Orientation | 2 | 5 | 4 |
| AMT 110 | Aircraft Electricity | 3 | 3 | 4 |
| AMT 115 | Aircraft Weight and Balance | 3 | 3 | 4 |
| MAT 121 | Technical Algebra and Geometry with Statistics | 2 | 2 | 3 |
| Semester 2 | ||||
| AMT 201 | Powerplant Maintenance 1 | 4 | 6 | 6 |
| AMT 215 | Aircraft Propellers | 3 | 3 | 4 |
| PHY 115 | Aviation Maintenance Physics | 3 | 3 | 4 |
| Semester 3 | ||||
| AMT 202 | Powerplant Maintenance 2 | 4 | 6 | 6 |
| AMT 205 | Starting and Ignition Systems | 3 | 4 | 5 |
| ENG 101 | English Composition 1 | 3 | 0 | 3 |
| Semester 4 | ||||
| AMT 203 | Powerplant Maintenance 3 | 4 | 6 | 6 |
| AMT 210 | Engine Fuel and Lubrication Systems | 4 | 6 | 6 |
| Total Credits: | 42 | 53 | 61 | |
Aviation Maintenance Technology (AMT)
- Identify, inspect, repair, and fabricate fluid lines and fittings including rigid and flexible fluid and pneumatic system components.
- Identify, inspect, install, torque, and safety-check aircraft hardware.
- Identify various types of corrosion on aircraft structure, and use proper cleaning and treatment techniques.
- Read, interpret, and analyze aircraft technical data, engineering drawings, and sketch and record repair schemes for aircraft.
- Perform ground operations and servicing of aircraft including taxiing, towing, marshaling, tie-down, engine run, and fuel and oil servicing.
- Understand mechanic privileges and limitations in accordance with Federal Aviation Regulations.
- Review aerodynamics and the application theory and concepts associated with the physics of aircraft flight.
- Understand and demonstrate concepts of electricity including troubleshooting faults and electrical installations.
- Understand and complete FAA required maintenance forms and records for aircraft maintenance.
- Understand concepts and techniques related to aircraft weight and balance, and perform weight and balance calculations and documentation.
- Utilize technical applications of algebra, geometry, and statistical analysis as necessary for employer requirements.
- Inspect, maintain, and repair metallic and non-metallic aircraft primary, secondary, and tertiary structural assemblies.
- Inspect, maintain, and repair landing gear, hydraulic and pneumatic systems, fuel systems, HVAC systems, electrical systems, fire and smoke protection systems, auxiliary power units, and oxygen systems.
- Inspect, maintain, and repair aircraft reciprocating engines, propellers, and aircraft turbine engines.
Courses
AMT 100 Aviation Standard Practices
6 Credits. 4 Lecture Hours. 6 Lab Hours.
A course that uses FAA-approved instruction for foundation concepts and techniques in aviation maintenance. Topics include: fluid lines and fittings, materials and processes, and cleaning and corrosion control.
Prerequisites: ENG 085 or appropriate placement test score
AMT 105 Aircraft Orientation
4 Credits. 2 Lecture Hours. 5 Lab Hours.
A course on foundation concepts in aviation maintenance. Topics include: aircraft drawings, ground operations and servicing, mechanic privileges, and basic concepts of physics.
Prerequisites: ENG 085 or appropriate placement test score
AMT 110 Aircraft Electricity
4 Credits. 3 Lecture Hours. 3 Lab Hours.
A course that uses FAA-approved instruction for foundation concepts and techniques in aviation maintenance. Topics include: basic concepts of math, physics, and electricity; aircraft drawings; and maintenance forms and records.
Prerequisites: MAT 120 or appropriate placement test score
AMT 115 Aircraft Weight and Balance
4 Credits. 3 Lecture Hours. 3 Lab Hours.
A course on foundation concepts and techniques related to aircraft weight and balance. Topics include: maintenance forms and records, and maintenance publications.
Prerequisites: MAT 120 or appropriate placement test score
AMT 120 Aircraft Non-Metal Structures
5 Credits. 3 Lecture Hours. 4 Lab Hours.
A course on wood structures, aircraft covering, aircraft finishes, and inspection of bonded structures.
Prerequisites: AMT 105
AMT 125 Aircraft Metal Structures
5 Credits. 3 Lecture Hours. 5 Lab Hours.
A course on repairing and maintaining sheet metal structures. Topics include: selecting and installing rivets and fasteners, forming and bending sheet metal, and laying out repairs.
Prerequisites: AMT 100 and AMT 105
AMT 130 Aircraft Welding Processes
3 Credits. 2 Lecture Hours. 2 Lab Hours.
A course on welding of magnesium, titanium, aluminum, and steel in aircraft. The course does not prepare students for certification specific to welding.
Prerequisites: None
AMT 135 Aircraft Landing Gear Systems
5 Credits. 3 Lecture Hours. 5 Lab Hours.
A course on repairing and maintaining aircraft landing gear systems and hydraulic and pneumatic power systems.
Prerequisites: AMT 105 and MAT 121
AMT 140 Airframe Electrical Systems
6 Credits. 4 Lecture Hours. 4 Lab Hours.
A course on troubleshooting aircraft electrical systems and inspecting direct current generators.
Prerequisites: AMT 105 and AMT 110
AMT 145 Airframe Electronic Systems
2 Credits. 2 Lecture Hours. 1 Lab Hour.
A course on aircraft instrument systems and communication and navigation systems.
Prerequisites: AMT 105 and AMT 110
AMT 150 Airframe Systems
4 Credits. 3 Lecture Hours. 3 Lab Hours.
A course on systems for cabin atmosphere and control, position and warning, ice and rain control, fire protection, and aircraft fuel.
Prerequisites: AMT 100, AMT 105, and AMT 110
AMT 155 Airframe Assembly and Rigging
5 Credits. 3 Lecture Hours. 4 Lab Hours.
A course on balancing rigging, and inspecting primary and secondary flight controls of rotor and fixed wing aircraft.
Prerequisites: AMT 100, AMT 105, and MAT 121
AMT 160 Airframe Inspection
2 Credits. 1 Lecture Hour. 3 Lab Hours.
A course on inspection of airframes and sheet metal structures, repair of sheet metal structures, and conformity inspections on rotor and fixed wing aircraft.
Prerequisites: AMT 105 and AMT 115
AMT 191 Part-Time Cooperative Education 1: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.
Students seeking an associate's degree participate in their first part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 100
AMT 192 Part-Time Cooperative Education 2: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.
Students seeking an associate's degree participate in their first part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 191
AMT 193 Part-Time Cooperative Education 3: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.
Students seeking an associate's degree participate in their third part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 192
AMT 194 Part-Time Cooperative Education 4: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.
Students seeking an associate's degree participate in their fourth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 193
AMT 195 Part-Time Cooperative Education 5: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.
Students seeking an associate's degree participate in their fifth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 194
AMT 196 Part-Time Cooperative Education 6: Aviation Maintenance Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.
Students seeking an associate's degree participate in their sixth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 195
AMT 198 First Year Special Topics in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.
A course on selected topics related to Aviation Maintenance Technology, which gives students opportunities to study information not currently covered in other courses. Grades issued are A, B, C, D, or F.
Prerequisites: Instructor Approval
AMT 199 First Year Independent Project in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.
A project related to Aviation Maintenance Technology that is completed by one or more students to meet specific educational goals. Projects must have prior approval and supervision by Aviation Maintenance Technology faculty. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: Instructor Approval
AMT 201 Powerplant Maintenance 1
6 Credits. 4 Lecture Hours. 6 Lab Hours.
A course that uses FAA-approved instruction for concepts and techniques in inspection and repair of radial engines; overhaul of reciprocation engines; and inspection, check, service and repair of reciprocating engines and engine systems.
Prerequisites: AMT 100 and AMT 105
AMT 202 Powerplant Maintenance 2
6 Credits. 4 Lecture Hours. 6 Lab Hours.
A continuation of AMT 201, using FAA-approved instruction for concepts and techniques in installation, troubleshooting, and removal of reciprocating engines; overhaul of turbine engines; and induction and engine airflow systems.
Prerequisites: AMT 201
AMT 203 Powerplant Maintenance 3
6 Credits. 4 Lecture Hours. 6 Lab Hours.
A continuation of AMT 202, using FAA-approved instruction in the subject areas of inspection, check, service, and repair of turbine engines and turbine engine installations; installation, troubleshooting, and removal of turbine engines; performing powerplant conformity and airworthiness inspection; engine exhaust and reverser systems; unducted fans; and auxiliary power units.
Prerequisites: AMT 202
AMT 205 Starting and Ignition Systems
5 Credits. 3 Lecture Hours. 4 Lab Hours.
A course that uses FAA-approved instruction for concepts and techniques in ignition and starting systems for reciprocating and turbine aircraft engines. Topics include: inspection, troubleshooting, and repair.
Prerequisites: AMT 105 and AMT 110
AMT 210 Engine Fuel and Lubrication Systems
6 Credits. 4 Lecture Hours. 6 Lab Hours.
A course that uses FAA-approved instruction for concepts and techniques in lubrication systems, fuel metering systems, and engine fuel systems.
Prerequisites: AMT 100 and AMT 105
AMT 215 Aircraft Propellers
4 Credits. 3 Lecture Hours. 3 Lab Hours.
A course that uses FAA-approved instruction for concepts and techniques in removal, installation, inspection, and repair of fixed and variable pitch aircraft propellers and propeller governing systems.
Prerequisites: AMT 105 and AMT 115
AMT 250 Unmanned Aerial Systems
3 Credits. 2 Lecture Hours. 2 Lab Hours.
A course on constructing, assembling, inspecting, repairing, and maintaining a small unmanned aerial system (drone). Topics include: designing and constructing a platform, soldering circuit boards and electrical components, programming operating and control systems, assembling propulsion systems, and checking operations.
Prerequisites: None
AMT 255 Unmanned Aerial Systems - Remote Pilot Certification
2 Credits. 1 Lecture Hour. 2 Lab Hours.
A course on safely and legally operating an unmanned aerial system (UAS) as an operator, observer, and operations administrator in compliance with Federal Aviation Regulations. The course also prepares students to successfully complete the Federal Aviation Administration FAR Part 107 Remote Pilot certification exam.
Prerequisites: None
AMT 270 Avionics Orientation
4 Credits. 3 Lecture Hours. 2 Lab Hours.
A course on aircraft and avionics systems topics and terminology. Topics include: aircraft parts, aircraft axis and controls, flight controls, theory of flight, pre- and post-flight inspection, and ground movement and storage of aircraft. The course prepares students to successfully complete the National Center for Aircraft Technician Training exam for Aircraft Electronics Technician.
Prerequisites: None
AMT 271 Avionics 1
4 Credits. 3 Lecture Hours. 2 Lab Hours.
A course on concepts and skills for repair of avionics equipment. Topics include: procedures used by air carriers and repair stations; avionics publications, forms,and records; tools and equipment; buildup of wire bundles; review of Boolean Algebra; and ARINC codes.
Prerequisites: AMT 155
AMT 272 Avionics 2
4 Credits. 3 Lecture Hours. 2 Lab Hours.
A continuation of AMT 271. Topics include: logic gates, troubleshooting analog and digital electronic systems to line replicable units, amplifier theory, on-board navigation and maintenance computer systems, and intercom and passenger entertainment systems.
Prerequisites: AMT 271
AMT 290 FAA General, Airframe, and Powerplant Certification Test Preparation
4 Credits. 4 Lecture Hours. 0 Lab Hour.
A course that prepares students to successfully complete the Federal Aviation Administration (FAA) General, Airframe, and Powerplant written, oral, and practical tests. To enroll in the course, student must be a graduate of a Part 147 school or hold FAA-signed Form 8610-2.
Prerequisites: Graduate of a Part 147 school or hold FAA-signed Form 8610-2
AMT 291 Full-Time Cooperative Education 1: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.
Students seeking an associate's degree participate in their first full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None
AMT 292 Full-Time Cooperative Education 2: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.
Students seeking an associate's degree participate in their second full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 291
AMT 293 Full-Time Cooperative Education 3: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.
Students seeking an associate's degree participate in their third full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 292
AMT 294 Internship 1: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.
Students seeking an associate's degree participate in their first unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 100
AMT 295 Internship 2: Aviation Maintenance Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.
Students seeking an associate's degree participate in their second unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: AMT 294
AMT 298 Second Year Special Topics in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.
A course on selected topics related to Aviation Maintenance Technology, which gives students opportunities to study information not currently covered in other courses. Grades issued are A, B, C, D, or F.
Prerequisites: Instructor Approval
AMT 299 Second Year Independent Project in Aviation Maintenance Technology
1-9 Credits. 0 Lecture Hour. 0 Lab Hour.
A project related to Aviation Maintenance Technology that is completed by one or more students to meet specific educational goals. Projects must have prior approval and supervision by Aviation Maintenance Technology faculty. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: Instructor Approval
Faculty
Program Chair/Advisor
Professor Jeff Wright, MS, FAA A&P, DME
jeffrey.wright@cincinnatistate.edu
Co-op Coordinator
Professor Kimberly Richards, EdD
kimberly.richards@cincinatistate.edu
Advisors
Wendy Steinberg, MS
wendy.steinberg@cincinnatistate.edu
Carole Womeldorf, PhD
carole.womeldorf@cincinnatistate.edu