Electrical Engineering Technology - Biomedical Equipment Major (BMT)

Electrical Engineering Technology - Biomedical Equipment Major (BMT)

Graduates of the program Electrical Engineering Technology - Biomedical Equipment Major are welcomed in hospitals and companies where medical equipment is designed, tested, installed, and operated because of their strong background in electronics and information systems along with knowledge of specialized biomedical equipment.

Graduates of the Biomedical Equipment Major earn an Associate of Applied Science degree and are prepared to take on the challenging tasks of hospital healthcare technology management and maintaining multi-million dollar equipment such as MRI, CT, sonogram, X-ray, and other medical equipment.

The curriculum also provides an effective foundation for transfer into a related bachelor’s degree program.

For more information, please contact the Engineering and Information Technologies Division at (513) 569-1743.

To apply for this program at Cincinnati State, visit the Admissions section of the College website.

Electrical Engineering Technology - Biomedical Equipment Major (BMT)

Semester 1LecLabCredits
EET 100Introduction to Electrical Engineering Technology ( B) 122
ENG 101English Composition 1 ( G) 303
CIT 190Career Preparation: Engineering and Information Technologies ( B) 101
MAT XXX Mathematics Elective 1 (B)  324
FYE 1XX First Year Experience Elective (B)  101
Semester 2  
BMT 161Biomedical Instrumentation 1 ( T) 334
EET 131Circuit Analysis 1 ( T) 324
MAT XXX Mathematics Elective 2 (G)  324
Semester 3  
EET 132Circuit Analysis 2 ( T) 324
ENG 10X English Composition Elective (G)  303
EET 291Full-Time Cooperative Education 1: Electronics Engineering Technology ( B) 1402
Semester 4  
ESET 251Electronics ( T) 334
PHY XXX Physics Elective (G)  233
EET 121Digital Systems 1 ( T) 233
NETC 121Network Communications 1 ( B) 324
Semester 5  
BMT 262Biomedical Instrumentation 2 ( T) 334
NETC 122Network Communications 2 ( T) 223
ECO 1XX Economics Elective (G)  303
EMET XXX Electro-Mechanical Engineering Technology Elective (T)  233
Semester 6  
BIO 117Human Body in Health and Disease ( B) 303
EET 292Full-Time Cooperative Education 2: Electronics Engineering Technology ( T) 1402
Total Credits:  4911264

Electives

Mathematics Elective
Take one of the following series:
Algebra and Trigonometry
and Functions and Calculus
Or
Calculus 1
and Calculus 2
First Year Experience Elective
FYE 100College Success Strategies: Overview1
FYE 105College Success Strategies: Overview and Application2
FYE 110College Success Strategies: Practice and Application3
FYE 120College Success Strategies: Campus Integration4
English Composition Elective
ENG 102English Composition 2: Contemporary Issues3
ENG 103English Composition 2: Writing about Literature3
ENG 104English Composition 2: Technical Communication3
ENG 105English Composition 2: Business Communication3
Physics Elective
PHY 110Health Physics3
PHY 151Physics 1: Algebra and Trigonometry-Based4
PHY 201Physics 1: Calculus-Based5
Economics Elective
ECO 105Principles of Microeconomics3
ECO 110Principles of Macroeconomics3
Electro-Mechanical Engineering Technology Elective3
EMET 141Programmable Logic Controllers3
EMET 180Process Instrumentation3
EMET 245Laser 13
EMET 252Motors, Motor Controls, and Variable Drives3
EMET 270Robotics and Servomechanisms3

Some courses are offered in alternative versions identified with a letter after the course number-- for example, ENG 101 and ENG 101A.

  • This curriculum displays only course numbers without the added letter.
  • The alternative version, when available, meets the requirements of the course version without the added letter.

The letters G, B, and T (displayed after course titles or elective descriptions) identify types of courses required by the Ohio Department of Higher Education as part of an associate’s degree curriculum. 

G = General Education course in this curriculum

B = Basic Skills course in this curriculum

T = Technical course in this curriculum

Electrical Engineering Technology - Biomedical Equipment Major (BMT)

  • An ability to select and apply a knowledge of mathematics, science, engineering, and technology to engineering technology problems that require the application of principles and applied procedures or methodologies.
  • An ability to function effectively as a member or leader on a technical team.
  • An ability to apply written, oral, and graphical communication in both technical and non-technical environments; and an ability to identify and use appropriate technical literature.
  • An ability to conduct standard tests and measurements; to conduct, analyze, and interpret experiments; and to apply experimental results to improve processes.
  • A commitment to quality, timeliness, and continuous improvement.
  • An ability to apply project management techniques to electrical/electronic(s) systems development.
  • An ability to proficiently apply circuit analysis and design, computer programming, associated software, analog and digital electronics, microcontroller technology, and engineering standards to the building, testing, operation, and maintenance of electrical/electronic(s) systems.
  • An ability to integrate and synthesize technical information to resolve discrepancies requiring electrical or electronic knowledge.

BMT Courses

BMT 161 Biomedical Instrumentation 1
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A course on the role of the biomedical engineering technician, and fundamentals of systems and device maintenance. Topics include: hospital organization and regulations, professional certifications, safety, medical device maintenance, and technology management.
Prerequisites: MAT 124 (minimum grade C) or appropriate Math placement
Corequisites: EET 131 : Circuit Analysis 1
View Sections

BMT 191 Part-Time Cooperative Education 1: Biomedical Equipment and Information Systems Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their first part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None
View Sections

BMT 192 Part-Time Cooperative Education 2: Biomedical Equipment and Information Systems Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their second part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 191
View Sections

BMT 193 Part-Time Cooperative Education 3: Biomedical Equipment and Information Systems Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their third part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 192
View Sections

BMT 194 Part-Time Cooperative Education 4: Biomedical Equipment and Information Systems Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fourth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 193
View Sections

BMT 195 Part-Time Cooperative Education 5: Biomedical Equipment and Information Systems Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fifth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 194
View Sections

BMT 196 Part-Time Cooperative Education 6: Biomedical Equipment and Information Systems Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their sixth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 195
View Sections

BMT 262 Biomedical Instrumentation 2
4 Credits. 3 Lecture Hours. 3 Lab Hours.

A continuation of BMT 161. Topics include: patient and surgical monitoring, complex medical devices, imaging equipment, medical technology management, equipment malfunction, and globalization.
Prerequisites: EET 121 (minimum grade C) and BMT 161 and EET 132
Corequisites: ESET 251 : Electronics
View Sections

BMT 291 Full-Time Cooperative Education 1: Biomedical Equipment and Information Systems Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None
View Sections

BMT 292 Full-Time Cooperative Education 2: Biomedical Equipment and Information Systems Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 291
View Sections

BMT 293 Full-Time Cooperative Education 3: Biomedical Equipment and Information Systems Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their third full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 292
View Sections

BMT 294 Internship 1: Biomedical Equipment and Information Systems Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 151 and CIT 190
View Sections

BMT 295 Internship 2: Biomedical Equipment and Information Systems Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: BMT 294
View Sections

EET Courses

EET 100 Introduction to Electrical Engineering Technology
2 Credits. 1 Lecture Hour. 2 Lab Hours.

An introduction to concepts and measuring skills for the electronics field. Topics include: current, voltage, power, Ohm's law, series circuits, meter reading, software simulation use, and circuit construction.
Prerequisites: MAT 093 or appropriate placement
View Sections

EET 101 Electronic Fundamentals 1
3 Credits. 2 Lecture Hours. 3 Lab Hours.

A course on electrical fundamentals for non-electrical majors. Topics include: DC and AC circuit theory, electrical motors and controls, electromagnetic devices, and transformers.
Prerequisites: Placement into ENG 101A MAT 096 or MAT 124 or appropriate Math placement
View Sections

EET 121 Digital Systems 1
3 Credits. 2 Lecture Hours. 3 Lab Hours.

A course on analyzing, designing, and troubleshooting digital logic circuits. Topics include: basic gates and programmable logic devices (PLDs); number systems and codes; Boolean algebra; circuit simplification; and functions of logic circuits, latches, flip-flops, counters, timers, and memory.
Prerequisites: MAT 124 (minimum grade C) or appropriate Math placement
Corequisites: EET 131 : Circuit Analysis 1
View Sections

EET 122 Digital Systems 2
3 Credits. 2 Lecture Hours. 3 Lab Hours.

A continuation of EET 121. Topics include: counter design and cascading, shift registers, PLD applications, microprocessor registers, input/output (I/O), busses, direct memory access (DMA), memory expansion, and assembly language programming.
Prerequisites: EET 121 (minimum grade C)
View Sections

EET 131 Circuit Analysis 1
4 Credits. 3 Lecture Hours. 2 Lab Hours.

A course on DC electric circuits. Topics include: current, voltage, resistance, and power; laws applied to series, parallel, and series-parallel circuits; Thevenin's, Superposition, and Norton's theorems; steady state and transient behavior of capacitive and inductive devices; and magnetic properties.
Prerequisites: MAT 124 (minimum grade C) or appropriate Math placement
Corequisites: EET 100 : Introduction to Electrical Engineering Technology or EMET 150 : Introduction to Controls and Robotics
View Sections

Ohio Transfer Assurance Guide Approved

EET 132 Circuit Analysis 2
4 Credits. 3 Lecture Hours. 2 Lab Hours.

A continuation of EET 131. Topics include: sinusoidal wave characteristics; complex numbers; phasors; transformers; RC, RL, and RLC networks; filter networks; three-phase and poly-phase systems; and power factor analysis.
Prerequisites: MAT 125 or appropriate Math placement (minimum grade C) EET 131 (minimum grade C)
View Sections

Ohio Transfer Assurance Guide Approved

EET 191 Part-Time Cooperative Education 1: Electronics Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their first part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None
View Sections

EET 192 Part-Time Cooperative Education 2: Electronics Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their second part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 191
View Sections

EET 193 Part-Time Cooperative Education 3: Electronics Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their third part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 192
View Sections

EET 194 Part-Time Cooperative Education 4: Electronics Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fourth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 193
View Sections

EET 195 Part-Time Cooperative Education 5: Electronics Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their fifth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 194
View Sections

EET 196 Part-Time Cooperative Education 6: Electronics Engineering Technology
1 Credit. 1 Lecture Hour. 20 Lab Hours.

Students seeking an associate's degree participate in their sixth part-time field learning experience related to their degree. Students are expected to register for academic courses during the same semester. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 195
View Sections

EET 291 Full-Time Cooperative Education 1: Electronics Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: None
View Sections

EET 292 Full-Time Cooperative Education 2: Electronics Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 291
View Sections

EET 293 Full-Time Cooperative Education 3: Electronics Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their third full-time field learning experience related to their degree. Students must follow cooperative education policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 292
View Sections

EET 294 Internship 1: Electronics Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their first unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 131 and CIT 190
View Sections

EET 295 Internship 2: Electronics Engineering Technology
2 Credits. 1 Lecture Hour. 40 Lab Hours.

Students seeking an associate's degree participate in their second unpaid field learning experience related to their degree. Students must follow applicable policies and procedures to earn credit. Grades issued are Satisfactory or Unsatisfactory.
Prerequisites: EET 294
View Sections